You searched for Potentiostat - BioLogic

Looking for something?

Results in

Products.

VSP-300 Potentiostat

Perfect for group working the VSP-300 electrochemical workstation can be connected to a LAN and controlled independently by multiple users
More info

VMP-3e Multichannel Potentiostat

16 channel electrochemical workstation with 1 A (extendable to 800 A) current capability as well as EIS Quality Indicators. This enhanced multichannel potentiostat is perfect for battery research & testing
More info

SP-50e Potentiostat

A robust, single channel, general purpose potentiostat perfect for both general electrochemistry research needs as well as teaching.
More info

VMP3 Multichannel Potentiostat

Includes low current measurement, impedance and high current capability via plug-in modules.
More info

VSP Potentiostat

EIS measurement from 10 µHz to 1 MHz, Current ranging from 10 μA up to 1 A
More info

SP-200 Potentiostat

The perfect electrochemical workstation for corrosion with the 100 fA accuracy ultra-low current option
More info

BP-300 potentiostat

A versatile potentiostat capable of generating any bipot measurement, such as Rotating Ring Disk Electrode (RRDE) and InterDigitated Array (IDA) electrodes.
More info

HCP-803 Potentiostat

A research-grade electrochemical workstation with the power of an 80 A booster
More info

SP-300 Potentiostat

A state-of-the-art research grade potentiostat with a 500 mA to 10 A range, built-in EIS and many other high-end specifications
More info

SP-150 Potentiostat

Based on a modular chassis, this potentiostat can be customized to address every possible application in the field of classical electrochemistry.
More info

SP-50 Potentiostat

User-friendly electrochemical workstation designed to address general electrochemistry & corrosion applications amongst others
More info

VSP-3e Potentiostat

Eight channel potentiostat / galvanostat with +/- 1A (expandable up to 800A); Ethernet connectivity, Built-in EIS (Electrochemical Impedance Spectroscopy)
More info

HCP-1005 Potentiostat

A compact high-current electrochemical workstation - FRA specifically designed to study high-capacity secondary batteries
More info

VMP-300 Potentiostat

EIS capability up to 7 MHz and ultra low current sensitivity with the ULC option
More info

SP-150e Potentiostat

The SP–150e is the only ampere capable electrochemical workstation to boast high-current capability (800 A with boosters), three EIS quality indicators (THD, NSD, NSR) for Electrochemical Impedance Spectroscopy validation and Ethernet compatibility for improved group-working.
More info

Boosters for Essential Potentiostats

More info

Boosters for Premium Potentiostats

More info

MCS-200

Conductivity detection is ideally suited to inorganic reduction/oxidation reaction, proton exchange, metal ligand binding and micelle formation from surfactants. Conductivity can bring complementary information to absorbance meaning the simultaneous acquisition of two signals is possible.
More info

Low Current option

Lowers the base current range from 10 μA to 1 nA
More info

ARG

Additional module providing voltage scans of up to 1 MV/s with an acquisition time down to 1 μs.
More info

Ultra Low current (down to aA resolution)

Lowers the base current range from 1 μA to 1 pA, making the resolution of the low current option is 80 aA on the 1 pA range.
More info

MPG-200 battery cycler series

The MPG-200 series is a high-end battery testing system made up of two core configurations. The MPG-2 features 16 independent channels at 100 mA, whereas the MPG-205 offers eight 5 A channels. Both MPG battery testing systems are available with or without EIS capabilities.
More info

SAM-50

link up to 3 SAM-50 to record up-to 30 additional voltages.
More info

FlexP0060

A powerful booster suitable for Redox Flow Batteries (RFB) or fuel cell stacks.
More info

FlexP0012

Booster designed specifically for electrolyzer/fuel cell characterizations with a continuous maximum current of -200/+195 A for a single unit extendable up to -800/780 A by connecting four units in parallel
More info

BluRev Enclosure

The BluRev Enclosure is a multi-purpose lab accessory specifically designed for BioLogic instruments. The BluRev electrode, the cell and the cell cables are firmly held to maximise the stability, the reproducibility and the safety of all your steady-state experiments with a rotating electrode. Keep it steadier !
More info

BluRev Rotating Disk and Ring-Disk Electrode (RDE/RRDE)

BluRev is a range of robust, versatile, rotating disk (RDE) and rotating ring-disk (RRDE) electrodes ideal for use with BioLogic potentiostats. A range of quick-fit exchangeable electrode tips (multiple materials/diameters) can be easily added.
More info

FCT-50S

More info
Results in

Accessories.

Longer cables and hermetic cables for glove box

In this section, non-standard cables with various increased lengths are presented for use in specific applications. Furthermore, glove-box feedthroughs for measurements performed in a glove box are also shown.
More info

BH-1i

The BH-1i Battery Holder is a modular accessory for battery test applications, compatible with a wide variety of battery types (coin cells, 18650 and 26650 cells), up to 4 batteries can be tested simultaneously, with a maximum current of 12 A per channel.
More info

External device connection

Sometimes the electrochemical experiment is not enough to completely describe your system, and additional information is needed. In such case, a coupling with the electrochemical experiment is necessary. These few accessories will facilitate this coupling.
More info

CCH-1

A premium range battery holder using a 4-point connection. The CCH-1 is a premium alternative to the CCH-120 and CCH-124 coin cell battery holders.
More info

CESH-e (Enhanced Controlled Environment Sample Holder)

The Enhanced Controlled Environment Sample Holder (CESH-e) is a parallel plate sample holder dedicated to the electrical characterization of flat material samples in the temperature range between -40 to 150 °C.
More info
Results in

Document.

The mystery of potentiostat stability explained (Potentiostat stability) Battery – Application Note 4
AN 4. Potentiostat stability - Electrochemistry & Battery. Electrochemistry
Equivalent model of electrochemical cell inc. ref. electrode impedance and potentiostat parasitics Battery – Application Note 44
AN44. EIS artifacts precautions. Electrochemistry
Essential Potentiostat Range
Brochure detailing the full Essential range of BioLogic potentiostat / galvanostats
Premium Potentiostat Range
Brochure detailing the full Premium range of BioLogic potentiostat / galvanostats
UV-Visible spectroscopy & electrochemistry coupling: Spectroelectrochemisty on polypyrrol film Electrochemisty – Application Note 12
AN12. Spectroelectrochemistry. Electrochemistry
Instrument & Quartz Crystal Microbalance (QCM) coupling: Mass measurement during polypyrrol film deposition Electrochemistry – Application Note 13
AN13. eQCM - Electrochemistry. Electrochemistry
Application of the bipotentiostat to an experiment with a Rotating Ring-Disk Electrode (RRDE bipot) Battery – Application Note 7
AN7 RRDE bipot - Electrochemistry
IMVS investigation on photovoltaic cell (IMVS) Photovoltaics – Application Note 30
AN30 IMVS - Electrochemistry & Photovoltaic, Electrochemistry
In situ measurements for shrinking/dilation in energy storage devices during cycling Battery – Application Note 46
AN46. Dilatometer - Electrochemistry & Battery. Electrochemistry
Battery cycling with reference electrodes using the PAT-cell test cell Battery – Application Note 58
AN58. Reference electrode. Electrochemistry
Determination of the diffusion coefficient of an inserted species in a host electrode with EIS, PITT and GITT techniques Battery – Application Note 70
This application note shows the various relationships and methods needed to extract the diffusion coefficient of an inserted species into a host electrodes using Electrochemical Impedance Spectroscopy (EIS), Potentiostatic Intermittent Titermittent Technique (PITT) and Galvanostatic Intermittent Titration technique (GITT). The main results are that when the system is composed of several charge transfer resistances and double layer capacitances, only EIS can simply lead to the diffusion time constants and hence diffusion coefficients.
Simultaneous impedance measurements elements of a running cell stack in EC-Lab® Express (EIS pack) Battery – Application Note 16
AN16. EIS pack - Electrochemistry & Battery. Electrochemistry
Electrochemical Noise Measurements Part III: Determination of the noise resistance Rn Corrosion – Application Note 39-3
AN 39-3. Electrochemical noise measurement ENA ASTM #3. Electrochemistry
EIS measurements on a RDE Part I: Determination of a diffusion coefficient using the new element Winf Electrochemistry – Application Note 66
AN 66. RDE diffusion. Electrochemistry
Electrochemical Noise Measurements Part I: ASTM assessment and validation of instrumental noise Corrosion – Application Note 39-1
AN 39-1. Electrochemical noise measurement ENA ASTM #1 .Electrochemistry
Inaccuracy of corrosion current determination in presence of ohmic drop Corrosion – Application Note 48
AN48. Ohmic drop - Electrochemistry & Corrosion. Electrochemistry
UFS-SEC: SpectroElectrochemical Cell for UV-Vis, NIR and IR measurement Spectroelectrochemistry – Application Note 52
AN52. Spectroelectrochemistry. Electrochemistry