Product Line Accessories - BioLogic

Premium Potentiostats.

Potentiostats with unparalleled quality, precision, performance and speed.

Premium range potentiostats are unparalleled in terms of precision, performance and speed. The range includes single- and multi-channel potentiostats, as well as bipotentiostats. BioLogic designed the Premium range for researchers who require the fastest, most precise potentiostats available. With up to 16 channels, this state-of-the-art range of potentiostats boasts the highest specifications available on the market:
EIS capability 10 µHz to 7 MHz
Sampling rate as fast as 1 data point every µs
Up to 13 current ranges:
Low current options down to ±100 fA measurement capability
Up to 150 A with internal boosters

Accessories.

CCH-1

A premium range battery holder using a 4-point connection. The CCH-1 is a premium alternative to the CCH-120 and CCH-124 coin cell battery holders.

PBH-125 / PBH-150

Two versions are available for pouch cell testing, one with a maximum current of 25 A, and another with a maximum current of 50 A. The 4-point connection of these holders allows high-accuracy measurements.

Standard corrosion cells

The standard corrosion cell is a one-liter cell that can accommodate oversized samples and is specially designed for uniform corrosion experiments.

Large volume analytical cells

This cell is perfect for standard analytical electrochemistry experiments with electrolyte volumes of several tens of mL. It is also compatible with the BluRev product range, ie the electrode rotators.

CC4-200A

The CC4-200A was specially designed for high power applications up to 200 A. Four FlexP0160 in parallel can reach 200 A and four HCV-3048 in parallel can reach 120 A.

PBH-4 / PBH-8

4 and 8-channel holders are available for small pouch cells up to 32 A. These holders have 4-point connection allowing high accuracy measurements.

CBH-4 / CBH-8

CBH-4 and CBH-8 are 4 and 8-position battery holders, respectively, dedicated to large and high power cylindrical battery cells.

BH-1i

The BH-1i Battery Holder is a modular accessory for battery test applications, compatible with a wide variety of battery types (coin cells, 18650 and 26650 cells), up to 4 batteries can be tested simultaneously, with a maximum current of 12 A per channel.

CCH-8

The CCH-8 is an 8 position coin holder designed for 20 and 24 mm coin cells, with a maximum thickness of 3.2 mm. Its 4 point connection provides low connection impedance, necessary for accurate AC and DC tests.

PPBH-132 / PPBH-1100

This 4-point measurement single channel holder is available in two versions, depending on the demanded maximum current: 32 or 100 A. Thanks to an adaptable tablet the same holder can be used for prismatic and flat pouch cells.

Protective suitcase

High-quality protective case designed to fit the following potentiostat/galvanostats: SP-200, SP-240, SP-300

Small volume analytical cells

Small volume cells for precious electrolytes and small active areas, to be used mostly for analytical electrochemistry

CC8

The CC8 current collector offers the possibility to connect in parallel up to eight channels and increase the maximum current that can be passed through the cell.