Learning Center.
An ever-growing source of articles to help you with your research
looking for a specific article?
Search by
EC-Lab® solutions for coupling with external devices
This article shows how to integrate, synchronize, and interface BioLogic potentiostats with other devices and instruments using EC-Lab.
Sustainable batteries: Recycling and 2nd life
Characterization and utility of batteries after their first life.
What is CO2 electrolysis?
Introduction CO2 electrolysis and explaination of CO2 reduction reactions, products from CO2RR and discusses current challenges and prospects.
Get the best EIS measurements, even with longer cables
As an industry leader in Electrochemical Impedance Spectroscopy, BioLogic ensures accurate EIS measurements, regardless of cable length, by compensating for parasitic effect with factory-calibrated cables. Focus on your research, not your setup.
ZFit: How the sensitivity factor can help optimize the equivalent circuit
Sensitivity functions can help you decide if a specific parameter is relevant or not.
Why use RDE and RRDE method to characterize electrocatalysts?
This article explains how BluRev can help you understand electrocatalyst properties using RDE and RRDE methods
Introducing Symmetric Cells
Introduction to symmetric cells and their DC and AC electrochemical response.
What is a battery cycler?
What should I know about battery testing equipment?
Introduction to High Throughput Screening
Introduction of high throughput screening and explaination of its advantages compared to iterative testing.
SDC or SECM for high throughput scanning?
Comparison of Scanning Electrochemical Microscopy (SECM) and Scanning Droplet Cell (SDC) for high throughput workstation
What scanning probe electrochemistry platform is best for high throughput screening?
The article explains how to select the best high throughput workstation
Electrochemical characterisation of fuel cells and electrolysers
explaination of the electrochemical characterization of fuel cells and electrolysers using DC and AC techniques.
What are PEM Fuel Cells and Electrolyzers?
explaination the basic principles behind fuel cells / electrolyzers and how potentiostats are used to qualify fuel cell and electrolyzer performance.
The Gerischer Impedance
What exactly is the Gerischer impedance and which systems can be modelled with it?
M470: An all in one scanning probe electrochemistry software
Everything you need for local electrochemistry in one software
Optimize Pack and Stack Performance with Simultaneous Measurements
How our instruments and software configurations can measure both battery packs or fuel cell stacks and their individual cells simultaneously.
Safety & Conditional Limits: What are they and how are they used?
Understand the differences and the interest of embedded limits in EC-Lab® and BT-Lab®.
Make life easier with smart limits and automatic I Range
Explaination of new tools available in EC-Lab® V11.50 including I Range in Galvano mode and smart charge limits.
How to automate experiments and build complex protocols: An introduction to the M470 sequencer
Automating experiments, and writing complex protocols with the M470 sequencer.
Take your experiments ‘To Go’ with EC-Lab®
Unlock the true potential of your electrochemical experiments with wireless connectivity.
Which SCAN-Lab software should I use?
Information on when to use the different BioLogic software available for scanning probe electrochemistry.
EC-Lab®
The stand-out potentiostat interface that just keeps getting better
ZFit: How to have confidence in results using std err.?
Explaination of the significance of the std err. parameter in ZFit, the EIS fitting tool in EC-Lab.
What are All-Solid-State Batteries
Discover key differences from traditional lithium-ion batteries, ongoing research challenges, and instrumentation requirements
Need support?
