AN21 Double mixing stopped-flow using interrupted flow method . Stopped Flow/Rapid Kinetics
Looking for something?
Results in
Document.
Double mixing stopped-flow using interrupted flow method – SFM-2000 seriesRapid kinetics – Application Note 21
CV Sim: Simulation of simple redox reaction (E) Part 2 Ohmic drop effect & double layer capacitance Kinetics – Application Note 41-2
AN41-2 CV simulation #2. Electrochemistry
DC and AC characterization of a Vanadium Redox Flow Battery (VRFB) using a Pinflow 20 cm² test lab cell Battery – Application Note 71
The characterization of Vanadium Redox Battery Cells using BioLogic BCS-815 battery cyclers & a Pinflow® 20 cm² test cell.
High precision mixing ratios – SFM-2000 series – Rapid kinetics – Application Note 18
AN18. High precision mixing ratios. Stopped Flow/Rapid Kinetics
Determination of the diffusion coefficient of an inserted species in a host electrode with EIS, PITT and GITT techniques Battery – Application Note 70
This application note shows the various relationships and methods needed to extract the diffusion coefficient of an inserted species into a host electrodes using Electrochemical Impedance Spectroscopy (EIS), Potentiostatic Intermittent Titermittent Technique (PITT) and Galvanostatic Intermittent Titration technique (GITT). The main results are that when the system is composed of several charge transfer resistances and double layer capacitances, only EIS can simply lead to the diffusion time constants and hence diffusion coefficients.
Measurements of double layer capacitance Battery & Corrosion – Application Note 21
AN21, Double layer capacitance, Electrochemistry
Precise control of flow rate – SFM-2000 series -Rapid kinetics – Application Note 17
AN17. Precise control of flow rate. Stopped Flow/Rapid Kinetics
The mystery of potentiostat stability explained (Potentiostat stability) Battery – Application Note 4
AN 4. Potentiostat stability - Electrochemistry & Battery. Electrochemistry
Measurement of electrochromic bandshift at 520 nm with real-time scatter correction at 546 nmLife Sciences – Application Note 4
AN#4 JTS, Photosynthesis Measurement of electrochromic bandshift at 520 nm with real-time scatter correction at 546 nm
Measuring Intracellular Ca Changes in Human Sperm using Four Techniques: Conventional Fluorometry, Stopped Flow Fluorometry, Flow Cytometry and Single Cell Imaging
CITATION: Esperanza Mata-Martínez, Omar José, Paulina Torres-Rodríguez, Alejandra Solís-López, Ana A. Sánchez-Tusie, Yoloxochitl, Sánchez-Guevara, Marcela B. Treviño, and Claudia L. Treviño
Rapid mixing stopped-flow small-angle X-ray scattering study of lipoplex formation at beamline ID02@ESRF
CITATION: Borislav Angelov, Angelina Angelova, Markus Drechsler, Sylviane Lesieur
A Rapid Freeze-Quench Setup for Multi-Frequency EPR Spectroscopy of Enzymatic Reactions
CITATION: Roberta Pievo, Brigitta Angerstein, Alistair J. Fielding, Christian Koch, Ivo Feussner, and Marina Bennati
Effect of channel dimensions of serpentine flow fields on the performance of a vanadium redox flow battery
CITATION: Ravendra Gundlapalli, Sreenivas Jayanti⁎
Supercapacitor characterization by galvanostatic polarization method (DC characterizations) Supercapacitor – Application Note 51
AN51. DC characterizations - Supercapacitor. Electrochemistry
EIS measurements on a RDE Part I: Determination of a diffusion coefficient using the new element Winf Electrochemistry – Application Note 66
AN 66. RDE diffusion. Electrochemistry
How to measure the ohmic resistance of a battery using EIS (EIS-high-frequency-internal-resistance) Battery – Application Note 62
AN62. EIS high frequencies internal resistance. Electrochemistry
Cyclic and linear electron flow in plants revealed by JTS-10 spectrometerPhotosynthesis – Application Note 2
AN 2. Cyclic and linear electron flow in plants revealed by JTS-10. Spectroscopy/Photosynthesis
EIS measurements with multi sine Battery & Corrosion – Application Note 19
AN 19. EIS multi sine - Electrochemistry, Battery & Corrosion. Electrochemistry
Electrochemical Noise Measurements Part III: Determination of the noise resistance Rn Corrosion – Application Note 39-3
AN 39-3. Electrochemical noise measurement ENA ASTM #3. Electrochemistry
Electrical characterization of a ceramic with MTZ-35 and HTSH-1100 test fixture Material Science – Application Note 1
AN1. Electrical characterization of a ceramic with MTZ-35 and HTSH-1100 test fixture. Materials Science
Cyclic electron flow in C3 plantsPhotosynthesis – Application Note 3
AN 3. Cyclic electron flow in C3 plants. Spectroscopy
How to interpret lower frequencies impedance in batteries (EIS low frequency diffusion) Battery – Application Note 61
AN61. EIS low frequencies diffusion - Battery. Electrochemistry
Precautions for good impedance measurements (EIS) Battery & Electrochemistry – Application Note 5
AN5. EIS precautions - Electrochemistry & Battery. Electrochemistry
Fuel Cell Testing Part I: Overview and I/E characterizations (IV characterization) Fuel-Cell – Application Note 31
AN 31. IV characterization - Fuel-Cell. Electrochemistry
Distinctactions of cis and trans ATP within the double ring of the chaperonin GroEL
CITATION: Hays S. Rye, Steven G. Burston,, Wayne A. Fenton, Joseph M. Beechem, Zhaohui Xu, Paul B. Sigler & Arthur L. Horwich
CV Sim: Simulation of the simple redox reaction (E) – Part I: The effect of scan rate Kinetics – Application Note 41-1
AN 41-1. CV simulation #1 . Electrochemistry
Precision and Accuracy in Coulombic Efficiency Measurements (High Precision Coulometry HPC) Battery – Application Note 53
AN54. High Precision Coulometry HPC. Battery Cycling/Electrochemistry
Sensor pulsed techniques: SWV, DPV & NPV Electroanalysis & Electrochemistry Sensor – Application Note 67
AN67. Sensor pulsed techniques: SWV, DPV & NPV Electrochemistry.
THD: parameters affecting its value & comparison with other methods of linearity assessment Battery & Corrosion – Application Note 65
AN65. EIS Quality Indicators THD Electrochemistry
Enzyme Kinetics above Denaturation Temperature: A Temperature-Jump/Stopped-Flow Apparatus
CITATION: Bálint Kintses, Zoltán Simon,Máté Gyimesi, Júlia Tóth, Balázs Jelinek, Csaba Niedetzky, Mihály Kovács András Málnási-Csizmadia
An advanced EPR stopped-flow apparatus based on a dielectric ring resonator
CITATION: Günter Lassmann, Peter Paul Schmidt, WolfgangLubitz
Pore selectivity analysis of an aquaglyceroporin by stopped-flow spectrophotometry on bacterial cell suspensions
CITATION: Jean-Francois Hubert, Laurence Duchesne, Christian Delamarche, Amaury Vaysse, Herve Gueune and Celine Ragúenes-Nicol
Photovoltaic Characterizations: Polarization and Mott Schottky plot Photovoltaic – Application Note 24
AN24 EIS IV characterizations Mott Schottky, Electrochemistry
Kinetics of thermo-induced micelle-to-vesicle transitions in a catanionic surfactant system investigated by stopped-flow temperature jump
CITATION: Jingyan Zhang and Shiyong Liu
How to check and correct non-stationary EIS measurements using EC-Lab® (part 1) Corrosion – Application Note 69-1
How to check and correct non-stationary EIS measurements using EC-Lab®
Measurement of non-photochemical quenching using the JTS-150 pump probe spectrometerPhotosynthesis – Application Note 5
This application note describes how to measure non-photochemical quenching using the JTS-150 pump probe spectrometer
Battery cycling with reference electrodes using the PAT-cell test cell Battery – Application Note 58
AN58. Reference electrode. Electrochemistry
The modified inductance element $L_\text a$ Battery – Application Note 42
AN42. Battery-EIS modified inductance element. Electrochemistry
Protocols for intercalation electrodes materials-2, Potentiodynamic Cycling/Galvanostatic Acceleration (PCGA) PITT Battery – Application Note 2
AN 2. PITT - Electrochemistry & Battery. Electrochemistry
Instrument & Quartz Crystal Microbalance (QCM) coupling: Mass measurement during polypyrrol film deposition Electrochemistry – Application Note 13
AN13. eQCM - Electrochemistry. Electrochemistry
Inaccuracy of corrosion current determination in presence of ohmic drop Corrosion – Application Note 48
AN48. Ohmic drop - Electrochemistry & Corrosion. Electrochemistry
Graphical and analysis tools in M370/M470 software Scanning Probes – Application Note 8
Application Note 8. AN 8. Scanning Probe Electrochemistry.
Investigation of the diffusion of ferricyanide through porous membranes using the SECM150 Scanning Probes – Application Note 19
AN19. Investigation of the diffusion of ferricyanide through porous membranes using the SECM150. Scanning Probe Electrochemistry
Distribution of Relaxation Times (DRT): an introduction Battery – Application Note 60
AN60. EIS-Distribution of Relaxation Times DRT. Electrochemistry
Levich and Koutecký-Levich analysis tools: Electrochemical reaction kinetics measurement Kinetics – Application Note 56
AN56. Levich Koutecky Levich. Electrochemistry
Review and principles of conductivity measurementMaterial Science – Application Note 2
AN2. Review and principles of conductivity measurement. Materials Science
